Jump to content

Talk:Blast furnace

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia
Former good articleBlast furnace was one of the Engineering and technology good articles, but it has been removed from the list. There are suggestions below for improving the article to meet the good article criteria. Once these issues have been addressed, the article can be renominated. Editors may also seek a reassessment of the decision if they believe there was a mistake.
Article milestones
DateProcessResult
March 2, 2007Good article nomineeListed
June 23, 2008Good article reassessmentKept
July 17, 2021Good article reassessmentDelisted
Current status: Delisted good article

Tidying up

[edit]

Please only add new level 2 headings if your question really does not fit anywhere else as this talk page is a bit out of control. PutTheKettleOn (talk) 15:14, 6 August 2024 (UTC)[reply]

I have combined a few topics under similar headings/subheadings (historic GA assessment, discussion related to blast furnace history, auto-generated bot content). I will keep going over the next few days, although... most of the content is >10 years old, much of the rest is >3 years old and it is not clear what has been addressed and what is a hanging question/request. I have taken the liberty of deleting a couple of old requests from students completing school reports on BFs as they have probably both graduated by now. PutTheKettleOn (talk) 15:14, 6 August 2024 (UTC)[reply]

Environmental effects

[edit]

I have made some edits to the Environmental Impact section and plan to add additional information about the role of carbon capture in models for a net zero steel industry. I have also tried to remove references to emissions from steelmaking as a whole (although some remain - I plan to address them), as blast furnaces produce pig iron, which is a number of processes away from a finished steel product.

I propose that the comments in this talk section from 2007 are deleted as there is no major opposition and some are out of date. I will delete in a week unless there is any opposition. PutTheKettleOn (talk) 14:21, 6 August 2024 (UTC)[reply]

It might be useful to include the effects blast furnaces have on the envrinment. Sban062 02:22, 23 September 2007 (UTC)[reply]

Some one has added a statement about steelmaking as a "major" source of greenhouse gases. Some one else tagged this with "fact" (asking for a citation). I would not question that steelmaking is a significant source, but the greatest are certainly buring fossil fuels to generate electricity and power vehicles and machinery. I have thus substituted the word "unavoidable". I hope this is uncontroversal. As CO2 is a major greenhouse gas and its production from the process is described earlier, I do not think any further citation is needed. Peterkingiron 23:16, 31 October 2007 (UTC)[reply]
The revision is an improvement since it no longer asserts that steelmaking is "one of the major industrial contributors". There are many industrial sources (concrete for example - there's a lot more of it than steel) Tedickey 23:30, 31 October 2007 (UTC)[reply]
Progress has been made since 2007 and it is no longer unavoidable - hope you and others can add more details to article Chidgk1 (talk) 07:20, 7 July 2021 (UTC)[reply]
The contribution of the steel and cement sectors to global CO2 emissions are roughly the same, between 7-9% each depending on the analysis. Combined, this ~16% of global CO2 accounts for about 50% of industrial emissions (the rest from chemicals, refining, aluminium, glass etc). https://www.iea.org/reports/iron-and-steel-technology-roadmap, https://energypost.eu/concrete-8-of-global-emissions-and-rising-which-innovations-can-achieve-net-zero-by-2050/. The idea that steelmaking is not a significant contributor to emissions (either globally or as an industrial sector) is farcical and not the view of the major trade associations. Appreciate that these comments were left in 2007 but let's be real. PutTheKettleOn (talk) 07:53, 31 July 2024 (UTC)[reply]

I'm not sure I understand why data is given (granted I also added to this) for CO2 output per ton of steel when blast furnaces produce pig iron. I am aware of technical articles that have data on CO2 output per ton of iron, do you think adding this and then removing the stuff about steel would make more sense?Scirios (talk) 00:36, 31 July 2021 (UTC)[reply]

Agree it feels like an unnecessary duplication of data that should be on another page. The content to be changed (with data/reference) to show that the largest share of the emissions from the steelmaking process happen in the blast furnace and as such decarbing BFs is a high priority from a climate perspective. PutTheKettleOn (talk) 09:30, 31 July 2024 (UTC)[reply]

Technical information

[edit]

Top Gas Pressure Recovery Turbine

[edit]

One of the economical way of producing iron is Blast Furnace. To make the process more productive, several measures have evovled over the years. One of them being high top pressure operation. The high top pressure is maintained by a control mechanism on the offtake of the Blast Furnace that usually contains a venturi wherein the top gas is scrubbed (cooled & cleaned) as well as there is substantial pressure drop of the gas. Subsequently, dry type gas cleaning plant and Top Gas Pressure Recovery Turbine (TRT) have evolved. The dry type gas cleaning plant retains the sensible heat in the top gas for heat recovery and the TRT uses the high top gas pressure to deliver mechanical power to a generator which then produces power. With TRT, the specific power consumption now required by Blast Furnace to produce iron has come down significantly.

I was interested in preparing a complete list of Blast Furnace where high top pressure is more than 2 barg with and without TRT. The list would include the following 1. Blast Furnace identity (name / number, works location, company name & address with weblink & email id) 2. Blast Furnace specification (working volume, blast volume, blast pressure, oxygen enrichment of blast, top gas pressure, top gas temperature, type of gas cleaning plant (wet / dry), gas pressure & temperature after gas cleaning plant, TRT installed or not, power generation from TRT (if installed), specific power consumption of BF operation) —Preceding unsigned comment added by 203.197.123.146 (talk) 11:56, 22 November 2007 (UTC)[reply]

Article currently reads in part In the nearer term, a technology that incorporates CCS into the blast furnace process itself and is called the Top-Gas Recycling Blast Furnace is under development, with a scale-up to a commercial size blast furnace under way. The technology should be fully demonstrated by the end of the 2010s, in line with the timeline set, for example, by the EU to cut emissions significantly. Broad deployment could take place from 2020 on. No citation is given.

Such speculation is probably encyclopedic if well sourced, but it definitely needs a source. Andrewa (talk) 21:47, 25 April 2017 (UTC)[reply]

See [1] to have information about the technology. This assertion is true but... the sentence "should be fully demonstrated by the end of the 2010s" is maybe optimistic. Borvan53 (talk) 19:42, 17 November 2017 (UTC)[reply]

Waste gases

[edit]

please put some stuff about waste gases. cheers —Preceding unsigned comment added by 116.199.212.78 (talkcontribs)

Blast furnace compared to other processes

[edit]

"Blast furnaces are to be contrasted with air furnaces (such as reverberatory furnaces), which were naturally aspirated, usually by the convection of hot gases in a chimney flue. According to this broad definition, bloomeries for iron, blowing houses for tin, and smelt mills for lead would be classified as blast furnaces."

It appears to me that a blast furnace differs from these other furnaces in that it is a countercurrent flow operation. It has similar characteristics to towers used in chemical engineering operations. The temperature rises as the charge descends the tower and the slag covered iron droplets that from have a high surface area, which allows the carbon monoxide to better diffuse into the iron. The different temperature zones and concentrations of CO lead to different reactions and equilibrium states.Phmoreno (talk) 15:24, 4 August 2011 (UTC)[reply]

Walls

[edit]

What are the walls of blast furnaces made of? The inside is full of molten iron, what could the walls be made out of? I've seen steel mills in person and in pictures and many times the blast furnaces are rusting. Are the walls simply made of a higher-temperature alloy? If so, where are they made?RSido (talk) 20:44, 6 May 2009 (UTC)[reply]

It all depends on what period you are concerned with. Early furnaces were of stone. Later ones of brick. The charge is commonly contained using firebrick made of fireclay or other high-temperature ceramic materials. Peterkingiron (talk) 16:22, 8 May 2009 (UTC)[reply]
What Blast furnace says is :The iron making blast furnace itself is built in the form of a tall chimney-like structure lined with refractory brick., so I guess the answer is refractory brick.  Velela  Velela Talk   5:27 am, Today (UTC−5)
Only since the 18th century. Peterkingiron (talk) 13:51, 14 November 2009 (UTC)[reply]

The construction materials of the furnace I worked on in the 1960's are given in this image http://geoffjones.com/images/Blast_Furnace.jpg

Also the article should mention that blast furnaces are categorised by their hearth diameter. I —Preceding unsigned comment added by Geofones (talkcontribs) 20:32, 29 June 2010 (UTC)[reply]

Is there a minimum practical size (thermochemically) for a blast furnace?

[edit]

I know there are minimum economic sizes, with considerations for fuel and maintenance costs, but from a thermal/chemical standpoint, there can be other considerations. For instance, you can't scale a bloomery furnace much below 30cm in inside diameter for reasons of fuel element size, air injection, and thermal loss through the (~10cm) clay walls. That means that in practice, the minimal size creates maximum bloom sizes between 2 and 20kg

I'm wondering if there are similar low-end constraints on a traditional (cast-iron-producing) coal-iron-ore(-lime) blast furnace. Anyone know?

Riventree (talk) 01:18, 2 May 2020 (UTC)[reply]

See this chinese blast furnace which is pretty close to some african furnaces. I don't think there are smaller ones. Borvan53 (talk) 11:28, 9 August 2021 (UTC)[reply]

Largest blast furnaces

[edit]

Does anyone know a source for the largest blast furnaces around?
The largest should be in Japan as of my knowledge! http://www.nsc.co.jp/en/company/pdf/nscguide2011_e_065.pdf Lucien64 (talk) 22:41, 21 January 2012 (UTC)[reply]

Dead link. Is it the the Oita No. 2 blast furnace (Nippon Steel Corporation) which has a hearth diameter of 15.6 meters and a production capacity of 13,500 tpd hot metal (volume 5,775 m3 (according to NSC) Borvan53 (talk) 19:28, 31 May 2013 (UTC)[reply]

Casual googling came up with some candidates:

but it feels like there should be a a "top ten" list somewhere out there, probably at some speciality site.... --Alvestrand ([[User talk:Alvestrand|t

Don't forget China : 5800 cubic metres Blast Furnace of Shagang Borvan53 (talk) 14:31, 9 May 2013 (UTC)[reply]
In 2014, the largest blast furnace in the world is operated by the korean company POSCO. It is the Gwangyang BF1 (6000 m3 inner volume, 16.1 m hearth diameter) for a yearly hot metal production of 5.3 mt/a. Borvan53 (talk) 08:44, 15 December 2014 (UTC)[reply]

History

[edit]

Moorcroft Wood

[edit]

Moorcrooft Wood in Walsall was the site of Wilkinson's first experiments with top-fed blast furnaces using coal instead of coke. There are remains of the original slag on site. This was the first instance of the modern top-fed furnace. I see my reference to the only thing i can find about teh site on the web has been deleted -BUT this really is one of the most important sites in blast furnace history and yet is is almost totally unrecognised. The site and teh blast furnaces are clearly marked on the first series Ordnance Survey maps. 62.49.6.17 (talk) 12:22, 13 March 2008 (UTC)[reply]


Museum sites?

[edit]

In recent times, it has become a trend - particularly in Europe - to preserve old, decommissioned blast furnaces as museum sites. There's currently four "open to the public" sites in Germany (the Landschaftspark Duisburg-Nord, the Henrichshütte in Hattingen, the Völklinger Hütte and the Altes Hüttenareal Neunkirchen), with two more sites (Phoenix-West in Dortmund and the Maxhütte in Sulzbach-Rosenberg) currently in the process of being reworked into museum sites. Spain has three museum sites, with the one in Sestao even serving as a header image for this article. Mexico has the Fundidora Park, also with a blast furnace as a museum site. I'm not sure what's going to happen with the place at Bethlehem Steel in the US.

Does this recent trend deserve a section in the article?--87.164.100.143 (talk) 23:04, 30 January 2010 (UTC)[reply]

I would suggest that this should not be added to the article, which is primarily about the technology, but that a separate article should be created, such as List of preserved historic blast furnaces. I would suggest that this should take the form of a table with columns such as Country; Name; period of use; status; reference. The latter would cover issues, such as preserved in museum; standing in park; preserved and open by appointment; viewable from road or path; on private property (i.e. not accessible). The reference column could be used for an external website link. If you like to start such an article, I will probably add examples in UK. There are also sites in Sweden, USA, Belgium etc. They are sufficiently numerous for it to be inappropriate to put them in this article. There is a precedent for this is lists of watermills: see List of watermills in the United Kingdom. Peterkingiron (talk) 15:47, 31 January 2010 (UTC)[reply]
I observe that a section has now been added. I would caution against expanding this much, as it will unbalance the article, which did have GA-status, but this will now be lost as the new stecion is unreferenced. Peterkingiron (talk) 18:35, 31 January 2010 (UTC)[reply]
I added some sources, mostly official websites for the German locations, which are in German (I hope this doesn't pose a problem). It's difficult to find official sources for some sites, even for Fundidora Park now its official website has closed. Does this article require academic sources that describe the existence and the properties of these locations, or do tourist photos that prove the places exist suffice?--87.164.111.177 (talk) 10:19, 1 February 2010 (UTC)[reply]
Finally created an account. Started the list.--Farrokh Bulsara (talk) 12:22, 1 February 2010 (UTC)[reply]
I do not think we need academic sources for the existence and locations of the sites, as long as the sources meet WP:RS. English language sites are preferable, since this is the English WP, but better still (probably) to cite a good German source as well as a less good English one. Peterkingiron (talk) 16:43, 5 February 2010 (UTC)[reply]

Ironmasters killed?

[edit]

The last sentence of the section entiteled China" ends: "... where the ironmasters knowing the traditional skills or the scientific principles of the blast furnace process had been killed, the results were less than satisfactory".

This comes across as a somewhat indirect accusation. I'd prefer a direct statement, like: "in [X] regions, the production was impeded because the ironmasters who knew the traditional skills [etc...] had been killed by the maoists [or whoever]", followed by a citation.

I have no particular reason to doubt that something like this took place, but I feel this is serious enough to be well documented. — Preceding unsigned comment added by 188.126.203.251 (talk) 09:19, 30 April 2012 (UTC)[reply]

Mistakes about Catalan forge and Stückofen

[edit]

I corrected some obvious mistake about Catalan forge (see fr:Forge catalane) and Stückofen [fr]. Both are bloomeries, but essential characteristics are very different. Translating corresponding articles from french is necessary to upgrade this article. Borvan53 (talk) 14:31, 9 May 2013 (UTC)[reply]

Regarding blast furnace history and the use of coke

[edit]

The article makes a claim "The fuel used in these was invariably charcoal. The successful substitution of coke for charcoal is widely attributed to English inventor Abraham Darby in 1709.". If you go the the https://en.wikipedia.org/wiki/Coke_(fuel) you can clearly read "Historical sources dating to the 4th century describe the production of coke in ancient China.[2] The Chinese first used coke for heating and cooking no later than the ninth century.[citation needed] By the first decades of the eleventh century, Chinese ironworkers in the Yellow River valley began to fuel their furnaces with coke, solving their fuel problem in that tree-sparse region.[3]"

If the Chinese invented the blast furnace, and also were using coke with them in the 11th Century, why is this this article claiming that this guy named Abraham Darby came up with the idea of using coke, which was 500 years later? I also verified the sources in the Coke_(fuel) article, from the book McNeil, William H. The Pursuit of Power and it's all there.

I'm removing the line if anyone has questions about the edit. — Preceding unsigned comment added by 2601:CD:C000:1ED0:1510:4591:7563:AEDE (talk) 20:47, 1 June 2019 (UTC)[reply]

I'm afraid I've reverted your edit. It has multiple problems as it stands:
  • You removed cited material. At the least you should retain the cited material and add the new information to the article
  • You left the citation, which made it look like your claims about China came from the existing source, which they do not
  • You didn't provide a citation to the source for the new material.
It would certainly be possible to add the information from the Coke (fuel) article, but it needs to be more carefully added, with one or more properly cited sources. Thanks, Railfan23 (talk) 20:57, 1 June 2019 (UTC)[reply]
By the way, the Coke (fuel) article says that ironworkers in China used coke, but says nothing about them using blast furnaces at that time, which is the subject of this article. Railfan23 (talk) 20:58, 1 June 2019 (UTC)[reply]

Revert of material based on Nef

[edit]

While J. U. Nef was an important scholar in his time, his view that there was an industrial revolution in the period 1540-1640 is not now accepted by scholars. This is old academic writing, which has long since been superseded by the work of other scholars. I have therefore to revert the addition based on it. I have also reverted the rest of what has been added at the same time, which seemed to be a general comment, quite possibly be a non-specialist in the subject, and possibly in an inappropriate place in the article. Peterkingiron (talk) 23:45, 20 November 2009 (UTC)[reply]

Having looked at the other source cited - G. Eggert, The Rise and Fall of Medieval Iron Technology], it is clear to me that this is a relatively shallow, derivative article, without any citations and not an adequate reliable source. The article is not necessarily wrong, but it skates over the subject without adding of substance. Peterkingiron (talk) 00:01, 21 November 2009 (UTC)[reply]

Patent invalid

[edit]

The patent was found invalid by a court in 1841: Court of Exchequer 26 juni 1841, 151 E.R. 1266, Meeson and Welsby 806 (Neilson v. Harford), because it was found to relate to a mere "principle" rather than a true invention, thus pre-empting all applications of the principle, which could not be applid without "undue experimentation" though.

This court decision was cited more than once in landmark decisions of the US Supreme Court, that are still influential to the present day (because of the Anglo-Saxon system of binding precedents), notably U.S. Supreme Court 30 January 1854, 56 U.S. 62 (O'Reilly, et al. v. Morse) and U.S. Supreme Court 19 March 1888, 125 U.S. 136 (Tilghman v. Proctor). Especially the 8th claim in "Morse" is famous. It is believed to be the first software patent "avant la lettre". Rbakels (talk) 09:37, 18 February 2010 (UTC)[reply]

Please indicate what patent you mean. If it is hot blast, the fact that the patent was found invalid in terms of patent law does not mean that the introduction of hot blast was not a very importsant advance. Peterkingiron (talk) 17:32, 21 February 2010 (UTC)[reply]

Other metals

[edit]

Lead

[edit]
Cross-section of a blast furnace used to smelt lead.

Blast furnaces used to be the main way secondary lead was smelted, however they have been replaced by rotary furnaces in most of the world except the United States; blast furnaces are still the most commonly used process for recycling lead in the US. Blast furnaces accept slag, dross, and residues as charge materials. The process uses coke for fuel. The result is a lead bullion that is high in antimony, as well as slag and matte. The bullion can either be processed into lead antimony alloys or refined further.[1]

Blast furnaces are used today to smelt lead from its oxide, after it has been desilvered.

References

  1. ^ Production of recycled lead, retrieved 2008-07-01

Zinc

[edit]

A less commonly used method for smelting zinc uses a blast furnace.

Manganese

[edit]

The former main managnese production method. In France, last manganese blast furnaces only disappeared in 2003 History of ferromanganese production with blast furnace in France, from 1875 to 2003 Borvan53 (talk) 14:31, 9 May 2013 (UTC)[reply]

Ferrosilicon

[edit]

Ferrosilicon was historically produced with blast furnace. I don't have any ref, except A. Ledebur and T. Turner. Borvan53 (talk) 14:31, 9 May 2013 (UTC)[reply]

References

[edit]

Hello fellow Wikipedians,

I have just added archive links to 2 external links on Blast furnace. Please take a moment to review my edit. You may add {{cbignore}} after the link to keep me from modifying it, if I keep adding bad data, but formatting bugs should be reported instead. Alternatively, you can add {{nobots|deny=InternetArchiveBot}} to keep me off the page altogether, but should be used as a last resort. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 19:33, 29 March 2016 (UTC)[reply]


Hello fellow Wikipedians,

I have just modified one external link on Blast furnace. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 19:51, 9 December 2017 (UTC)[reply]


GA Sweeps

[edit]

Initial assessment

[edit]

This article has been reviewed as part of Wikipedia:WikiProject Good articles/Project quality task force in an effort to ensure all listed Good articles continue to meet the Good article criteria. In reviewing the article, I have found there are some issues that may need to be addressed.

  • If this article is intending to consider the use of blast furnaces for other than the production of pig iron, as the lead suggests, then it should do so. In the short term it may simply be better to remove the very short Other metals section.
  • There has been a {{clarifyme}} tag in Modern process since March.
  • The article should be clear and consistent in the way it uses units of measurement. In the Modern furnaces subsection a conversion to imperial is given for blast furnace volume, not for the metric amount of iron produced per week, and the following paragraph switches to tons (long tons?), again without a conversion.
  • The references and citations need to be tidied up. Having separate Notes and Bibliography sections will avoid duplicating sources like ref#1 and ref#5. Full publication details (date, publisher, isbn) need to be given for each printed source used. Ideally, the page or page numbers being used to support the material should be given in every case.
  • Ref#20 just strings three books together. Why?
  • Many common words are wikilinked, like "hydraulics", "timberland", and "winches". It makes the text distracting to see so many blue links. Only those topics that will add understanding to this article should be linked.

I will check back in no less than seven days. If progress is being made and issues are being addressed, the article will remain listed as a Good article. Otherwise, it may be delisted (such a decision may be challenged through WP:GAR). If improved after it has been delisted, it may be nominated at WP:GAN. Feel free to drop a message on my talk page if you have any questions, and many thanks for all the hard work that has gone into this article thus far. Regards, Malleus Fatuorum (talk) 18:29, 19 June 2008 (UTC)[reply]

I completely rewrote the section that had the {{clarifyme}} note, so it should be good now. Wizard191 (talk) 23:15, 22 June 2008 (UTC)[reply]
I think I took care of everything else other than your first note. Hopefully that will keep it in the good graces of the GA. Wizard191 (talk) 01:48, 23 June 2008 (UTC)[reply]
Thanks for all the work you've done. I've moved that very short Other metals section to talk, and also removed mention of it from the lead. If it's ever expanded, then of course it can be put back. I'd have preferred it if all of the published sources were separated out into the Bibliography subsection, and referenced from Notes, but I'm not going to be a bar steward over that. Obviously though, if there's any intention to take this article on to FA, the reference formatting will very likely be a significant problem. However, I'm happy now to confirm that this article has kept its GA listing. --Malleus Fatuorum (talk) 02:26, 23 June 2008 (UTC)[reply]
  • Can we lose the references to Woods? As far as I can make out, this is a derivative source, and not directly concerned with ironmaking technology. For example I very much doubt that blast furnace slag (a glassy material) was used as a fertiliser, and suspect that the author has become confused by basic slag from a 19th century open hearth process. However I have failed to locate any better English-language sources on monastic ironmaking in Champagne.
I don't know if that whole paragraph even belongs in this article. I feel like the contributor made a stretch adding it. I thing it should just be removed. Wizard191 (talk) 00:00, 24 June 2008 (UTC)[reply]
  • The material on Laskill seems to be based on newspaper reports (except Vernon et al, which is more about the research techniques used). The findings remains controversial, and no academic publication of the archaeological work has yet taken place.
  • The answer to the non-iron stub (below) may be to refer to it briefly in the introduction with a link to a new stub article on Non-ferrous Blast Furnaces. Peterkingiron (talk) 15:43, 23 June 2008 (UTC)[reply]
I don't think that a whole new article is needed for non-ferrous blast furnace. I think if the section is fleshed out it would fit well. I just don't think it will ever become a huge section (thus needing it's own article). Wizard191 (talk) 00:00, 24 June 2008 (UTC)[reply]

GA Reassessment

[edit]
This discussion is transcluded from Talk:Blast furnace/GA2. The edit link for this section can be used to add comments to the reassessment.

Has been missing a citation since 2017, but the main problem is lack of up to date info, such as hydrogen and CCS. Has lots of great history so I hope someone will be able to update the article. Chidgk1 (talk) 12:26, 8 July 2021 (UTC)[reply]

My comment is that the complaint about hydrogen and CCS is not justification for downgrading the article. If the article is factually incorrect, that would be a reason. I presume that CCS means carbon capture and storage. I think this would be the subject of a separate article and not be a required inclusion for every article on Wikipedia to justify a "good article" status. If the complainant would like to have a discussion of the use of hydrogen included, I suggest he or she do a literature search and add a section rather than arbitrarily downgrading what might otherwise be a good reference.

ChrisFountain::Sorry too busy to fix article myself. The justification is ::https://en.wikipedia.org/wiki/Wikipedia:Good_article_criteria#The_six_good_article_criteria

number 3: that the article was "broad in coverage" at the time it was last reviewed but is not now. Yes you are right Carbon capture and storage. Sources re significant developments since the last review:

https://www.globalccsinstitute.com/news-media/insights/ccs-a-necessary-technology-for-decarbonising-the-steel-sector/

https://www.worldsteel.org/en/dam/jcr:9480b8a4-1ff8-4b46-80c7-0a78fcd2d04b/Carbon%2520Capture%2520Storage_vf.pdf

https://www.nature.com/articles/s41467-018-06886-8

https://bellona.org/news/climate-change/2021-03-hydrogen-in-steel-production-what-is-happening-in-europe-part-one

Also just noticed that relationship with Basic oxygen steelmaking could be more clearly explained. And whether blast furnace will be outcompeted by arc furnace or Direct reduced iron. Also shaft furnace redirects here from Shaft furnace breather and is mentioned in lead but not enough in body of article. Chidgk1 (talk) 13:29, 8 July 2021 (UTC)[reply]

Some of the criticism is misplaced. A blast furnace makes pig iron, not carbon steel.

  • Direct reduced iron is not produced in a blast furnace. This is a different process, in which the metal does not become liquid. The fuel used has traditionally been natural gas (a waste product in oilfields), but hydrogen could be substituted and probably will be. Direct reduced iron suffers from the disadvantage that the gangue has not been removed, so that it may have to be melted in a blast furnace to remove these impurities.
  • Electric arc furnace is not a competitor or technological successor to the blast furnace. Its function is to recycle steel, sometimes with the addition of fresh material, which might include pig iron.
  • I have just made a number of changes - removing an unwarranted statement about Backbarrow and providing more detail on blowing arrangments. Peterkingiron (talk) 16:58, 10 July 2021 (UTC)[reply]
Peterkingiron Thanks for that explanation and your edits - I am glad an expert is on the case - I can just about remember drawing a blast furnace in school but that is all I know. You wrote the interesting sentence: "The blast furnace is likely to become obsolete to meet climate change objectives of reducing carbon dioxide emission." If a shaft furnace is a kind of blast furnace could you expand the text about it and if not amend the redirect mentioned above? Because one of the links above seems to be saying a shaft furnace would be used in future. Chidgk1 (talk) 18:13, 10 July 2021 (UTC)[reply]

Also, although the images and history are excellent, I could not see in the article some basic info about today. I don't mean exact figures but rough estimates for e.g. how many/much BF in world, which countries, how old? Nowadays there must be far more online sources than when the article was last reviewed in 2008. Chidgk1 (talk) 06:19, 11 July 2021 (UTC)[reply]

I see other languages have 3 featured (gold star) articles - perhaps editors of this article can get info and ideas from those. Chidgk1 (talk) 08:11, 11 July 2021 (UTC)[reply]

Despite me asking again at the metalworking project for more editors no one else has come forward to help Peterkingiron, so there are still lots of problem tags including 2 which are years old. ChrisFountain - could you assist? Chidgk1 (talk) 18:29, 15 July 2021 (UTC)[reply]

Hello, I am the writer of the French featured article. Imo, CCS, hydrogen steelmaking, and related technologies are fields of research and not proven improvement of blast furnaces. The future of blast furnace could be the use of charcoal, the burning of plastics, the boiethanol, more taxes on a more efficient tool, the help of electricity and/or NG, reducing hot blast,... It could also be a mix of different technologies on the same tool, or a single choice depending on the location.
Blast furnaces were invented 2000 years before, and latest patents about greenhouse gas reduction are not proven revelant. Today, nobody is able to predict the future of blast furnace, and the trend will be known in 10 years... if any evolution occurs!
So, downgrading this article because these researches are not developed is not, for me, a good reason. Oxygen blast furnace and CCS are clearly on a downward slope since 2012 because of huge Capex need and CO2 storage. Environmental impact is not the good word because blast furnaces are "clean" tools compared to sinter plant or other metallurgical processes. The way that Chidgk1 wants to update this article will lead to an original research and should not pollute this article.
It remains that this article is pretty poor, compared to the French one, and compared with other languages (Ukrainian, German). But its problems are clearly not the lack of modern exploratory technologies. Borvan53 (talk) 20:22, 15 July 2021 (UTC)[reply]
Bonjour Borvan53 - nice to hear from you and congratulations on getting your article featured. I wonder if you would be able to bring this article up to scratch. As your article is already featured and your English is C2 level I guess it would not take a lot of your time. No need for perfect grammar as I can do any minor copyedit tweaks once you finish - and I will not object to cites remaining in French. Chidgk1 (talk) 07:09, 16 July 2021 (UTC)[reply]
Hello Chidgk1. My contributions were too often reverted on the English Wikipedia to waste much time here. I will only recommend you to group all considerations about greenhouse gas reduction in a distinct section. This section could be named "current research related with greenhouse gas reduction", or something like that.
Translating my article in English will lead to a very high quality article, as the gold label in the French Wikipedia is far more stringent than the English one. The French article is itself an improved translation of the German one (30% of it content comes from it). Ukrainian article is not featured, but it is written by Blast furnace chip worker, who has a deep knowledge of the topic. Borvan53 (talk) 08:02, 16 July 2021 (UTC)[reply]
Thanks for those suggestions. I am reassessing this article not bringing it up to standard myself. I understand what you are saying about reversions as I had the same on Turkish Wikipedia. But your English is far better than my Turkish. If you are kind enough to edit this article and your edits are unjustly reverted I will strongly complain. Chidgk1 (talk) 08:40, 16 July 2021 (UTC)[reply]

Unfortunately it seems no one is going to complete bringing this article back up to standard. Therefore I conclude this article is no longer a good article because, for example, tags from 2017 and 2018 have not been dealt with, and it lacks basic info such as an estimate of how much BF capacity there is in the world. Chidgk1 (talk) 05:45, 17 July 2021 (UTC)[reply]

Agree it needs a good overhaul and removal of some suspected industry-related meddling (not industry sponsored, but I suspect there are a few editors affiliated to BFs who don't like the environmental discussion. PutTheKettleOn (talk) 11:28, 31 July 2024 (UTC)[reply]

Confused re oldid so asked at https://en.wikipedia.org/wiki/Wikipedia_talk:Good_article_reassessment#Instructions_for_what_to_put_in_oldid_when_failed_GAR Chidgk1 (talk) 06:21, 17 July 2021 (UTC)[reply]