Talk:Link aggregation
![]() | This article is rated C-class on Wikipedia's content assessment scale. It is of interest to the following WikiProjects: | |||||||||||||
|
![]() | The contents of the Channel bonding page were merged into Link aggregation on 29 September 2018. For the contribution history and old versions of the redirected page, please see its history; for the discussion at that location, see its talk page. |
Redirects to this page
[edit]The following redirects have been created that link to this article:
- 802.3ad
- ethernet trunk
- ethernet trunking
- link aggregate group
- NIC teaming
- port trunking
- port teaming
OSI layer
[edit]What OSI layer does link aggregation occur at? —Preceding unsigned comment added by 192.91.171.36 (talk • contribs)
- I guess it would conceptually fit between layers one and two. The data link layer (OSI layer 2) would be deciding which trunk to pass the data to. Then you'd have the aggregation layer splitting it between the ports and then the physical layer (OSI layer 1) for each port. Plugwash 21:02, 7 May 2006 (UTC)
I would generally agree with the answer above, with the expansion that link aggregations need not be on trunks. (That view may be due to confusion caused by a vendor who uses the term trunk for a connection that uses 802.1q tags and access for other ports. More generally a trunk connects switching systems and often, but not universally, uses 802.1q tags to carry separate vlans or services. Similarly, a "access port" may use 802.1q tags to provide access to separate vlans or services.) Link aggregation may be optionally used for either trunks between network elements or for edge connections; it is not limited to trunks.
The confusion may have been caused by a problem in the article -- the third paragraph discusses ISO layers, and intermixes the idea of aggregations at different layers with the issue of using data from different layers of the data to determine the spreading of the data across the multiple members of a link aggregation group (LAG). That paragraph needs to be reworked to separate these concepts. Alan Larson (talk) 03:23, 25 January 2013 (UTC)
Deleted this
[edit]- Some low-cost switches will typically have 24 or 48 10/100-mbit ports, and two additional gigabit ports for the backbone. The expected usage is that there is a 1-gigabit backbone, and the second gigabit port passes the backbone data along to the next switch in the network closet.
- While the two 1-gigabit ports may support operating as a single 2-gigabit trunk, there is no way for the switch to pass this 2-gigabit trunk along to additional switches. For a network with an expected maximum backbone speed of 2-gigabits, this is acceptable in a remote closet that can be fully served by the single switch with only 24 or 48 10/100-mbit ports. It is also acceptable if there a lot of switches in a closet and a single expensive switch can be used to manage all their uplinks.
We probably all know which switch he is describing and it should be patently obvious that if you are using this switch and decide to use BOTH of the gig ports for a downlink, then you won't have any ports left over to uplink. This has nothing to do with Link Aggregation and clearly not a limitation of it.
LACP
[edit]LACP is part of the 802.3ad specification, yet is not mentioned in this article. Anyone care to add it in the appropriate place? fonetikli 23:00, 20 July 2006 (UTC)
Another redirect
[edit]Redirecting 'ethernet bonding' here would be good. 83.27.231.169 20:15, 31 August 2006 (UTC) Kosma
- Redirect was created 23:54, 13 February 2008. -—Kvng 15:22, 7 January 2013 (UTC)
Path Polarization Definition?
[edit]Can someone explain or give a link to a definition for path polarization? I cannot find anything specific in a Google search.
Bezenek (talk) 19:55, 19 August 2010 (UTC)
I expect you are referring to the following passage:
The actual benefits vary based on the load-balancing method used on each device (administrators can configure different balancing algorithms at each end and this is actually encouraged to avoid path polarization).
I don't know who added this and what the thoughts behind the formulation were. However, many simple devices deploy the XOR algorithm described in the article. SA XOR DA is the same as DA XOR SA (SA=Source Address, DA=Destination Address). Since many network admins are tidy when patching, they will often end up connecting the lowest port on one switch to the lowest port on the other etc, ending up with e.g. port 20<=>port 20, 21<=>21, 22<=>22, 23<=>23; for a 4 link aggregate.
In that situation the same conversation between two end stations would flow back and forth on the same link instead of two different ones. I don't see what would be wrong with that, a large (20-30 in most cases) number of conversations will still provide a relatively even distribution. Crossing between ports can help in this case; 20<=>22, 21<=>23, 22<=>21, 23<=>20 for example.
Traffic flowing in one direction will normally not limit traffic flowing in the opposite direction on the same link, unless the link is half duplex. However, IEEE 802.1AX prohibits the use of half duplex links, so that will not be an issue.
EDIT: It occurred to me that when using layer 2 and layer 3 load distribution at the same time there can be a bigger issue. For example with ECMP on layer 3 and LACP on layer 2, having 2 ECMP routes being balanced towards 2 LACP aggregates with each 2 links. If for example using XOR for load sharing, this would send all the conversations to the first route into the first link of that aggregate, and the conversations to the second route into the second link of that aggregate. Some people appear to use the term polarization for this effect. One way around it would indeed be to use different "hashing" algorithms (one based on IP, the other on MAC addresses for example). Another would be to use 3 links in each LACP aggregate when using 2 routes in ECMP.
As I said, I do not know which thoughts the author had in mind at the time of writing, perhaps something I have overlooked. But I thought I'd contribute a possible explanation.
Michael —Preceding unsigned comment added by 80.57.199.198 (talk) 20:01, 24 January 2011 (UTC)
- I have trimmed this section to remove unsupported and confusing information. -—Kvng 15:38, 7 January 2013 (UTC)
Network Availability
[edit]I'm not a networking guru, but shouldn't there be some more reference to aggregation being used for network availability & redundancy rather than just bandwidth? I've seen it used a few times, and always for this purpose.
Also, how does 'static' and 'dynamic' link agregation fit in? zorruno 23:56, 7 September 2006 (UTC)
- There is a mention of it, but it only protects against link failures not equipment failures. Plugwash 22:28, 14 October 2006 (UTC)
The LACPDU mechanism actually is a quite good protection against equipment failures. —Preceding unsigned comment added by 188.174.67.0 (talk) 23:54, 24 April 2011 (UTC)
Linux Support and IP Based Load Balancing / Failover
[edit]As far as i know, after testing a current Linux Kernel. It can bond different branded Ethernet Adapters, but they are required to atleast use the same driver base e.g. e100/e1000 [Intel], 3c59x [3Com].
This means mixing of different branded Ethernet Chipsets may not be possible in some cases.
Linux, BSD & Windows Based operating systems do allow for IP Host Based Load Balancing / Failover. this method does not require the use of a high end switch with Layer 2 Management or 802.1ad Support
Hard__warE: 165.228.140.189 01:27, 12 April 2007 (UTC)
Limitations
[edit]Someone should add a limitations section or at least mention it. Remember, that Port Aggregation will only solve bandwidth issues if it is several devices hitting one device. There are at a lot of misconceptions that this solves all bandwidth issues. Hqduong 03:58, 9 May 2007 (UTC)
- Added a paragraph of limitations 210.131.130.125 (talk) 06:51, 13 April 2008 (UTC)
Cisco have Nexus hardware (7xxx switch series, NX-OS soft) with vPC, 2 different switches could be made as a single switch for LA. Virtual PortChannels: Building Networks without Spanning Tree Protocol — Preceding unsigned comment added by 193.33.123.14 (talk) 08:42, 11 July 2011 (UTC)
Packet Reordering
[edit]The page states "originally, link aggregation was developed to provide redundancy, and not bandwidth benefits". I don't find that in any of the cited material. Moreover, I don't believe that it's strictly true. Is this an inference based on the load-balancing behavior? Did somebody assume that since a single flow tops out at the speed of a single aggregated device that this was "developed to provide redundancy" rather than "bandwidth"?
The Linux bonding.txt documentation (linked from this article) hints at the real reason starting at line 1784. Basically, TCP (and most reordering protocols) don't handle packet reordering well. TCP detects the out-of-order packets as lost packets (typically signifying drops due to congestion) and can generate spurious, unnecessary retransmits. IP fragment-handling gets even more pathological (worst case, it becomes O(N) where N is the number of fragments).
I think that aggregation was originally not designed to provide redundancy but just aggregate bandwidth. The common defaults for interval time of LACP are pretty low for timely failover. Most aggregation systems can be configured statically without LACP as well. Rather, it seems that they were just designed to aggregate and the port-selection algorithms grew this way because they had to (i.e. straight round-robin hurt performance so much that it was required). All of this seems to indicate the opposite of what the article suggests, although without any original material to cite, I don't know if we should even take a position on this.
So, should we reword this bit to be a bit more neutral?--Jayson Vantuyl (talk) 14:36, 29 November 2008 (UTC)
What about uplink?
[edit]I wish there could be a little bit more info and how to calculate statistics on link and client aggregation for uplink backbones.
For example, how to calculate how much bandwidth do I need if there are 200 possible clients, within reach of my wireless signal, to provide them with 1 Mbps speeds, in a home environment?
I feel the need to learn this but there's nowhere to be found. Maybe it belongs to his article? Yubal (talk) 00:54, 21 April 2009 (UTC)
Maybe I'm confused
[edit]But in the past I've worked with port trunking and it's different from link aggregation. Port trunking assigns the same IP to all the ports on the trunk, and you need a special switch to connect to (or to go port to port between two systems) for port trunking to work as you cannot have multiple ports on a network with the same IP.
With (Linux) port aggregation the ports have different IPs and you do not need a trunking switch or any special equipment.
Now in my Linux bandwidth testing I found that aggregating two e1000 ports resulted in no increase of bandwidth, which I found surprising, but from the article text it seems that all traffic from a single session will flow down one wire. With muliple sessions the bandwidth should be more fully usable, but I did not test in that configuration. The trunking tests I did were with Solaris Sparc and I was CPU limited and unable to determine if there was a net bandwidth gain as I barely had the CPU to saturate one port.
I guess I need to look up the specification and see what it says. But from what I know, port trunking is something different (and I don't think it really caught on). Then again, maybe I'm just confused about how things are named.
76.254.74.81 (talk) 17:46, 19 August 2009 (UTC)Rich
Linux part, out of context?
[edit]There is no introduction to this part at all. What is it about really and why such long part about one type of LACP implementation? Why is the Linux LACP so important to note in a general article about LACP, when not for example LACP config modes on Cisco or HP Procurve switches is mentioned? There is also words used ("slaves") which is not defined at all. —Preceding unsigned comment added by 212.73.30.50 (talk) 13:18, 3 March 2011 (UTC)
very much agree, neutral info would be a lot better. noone would want a section about Tru64 LAGG either. I was looking for some LACP info and quickly skipped over the article to the IEEE doc as the relevant info (lacpdu rates for fast and slow) was missing in favor of OS-specific stuff. —Preceding unsigned comment added by 188.174.67.0 (talk) 23:58, 24 April 2011 (UTC)
SMLT and other stacking/multichassis technologies
[edit]SMLT is proprietary to Nortel. Kudos to them for being the first, and for a while, only, vendor with a solution but they no longer stand alone here. Cisco has at least three technologies (MEC - 6500 series, CrossStack EtherChannel (3750) and VPC (Nexus)as mentioned above), and even 3Com (DLA - 5500/5500G) and D-Link have (or had) offerings.
Point is, if we're going to include SMLT, we should include others. (I vote for listing others as well.) Titaniumlegs (talk) 23:04, 30 September 2011 (UTC)
Use of acronym LAG not clear
[edit]This article uses the acronym LAG multiple times but never spells it out. If you search for "Link Aggregate Group" using Wikipedia search, it sends you to this page, but searching for "Link Aggregation Group" returns a list of possibilities that include this page. The phrase "link aggregation group" is used on this page. According to www.acronymfinder.com the IEEE standard reference is "Link Aggregation Group." This article would be clearer if it showed what the acronym stood for. — Preceding unsigned comment added by 108.52.128.210 (talk) 15:21, 25 July 2012 (UTC)
Earth to Experts that wrote this - COME IN PLEASE!!!
[edit]I have years of sysadmin experience and even I am put off by the way this article plunges right into the subject matter without a simple explanation of the topic. Please start in the beginning and try to imagine what someone who does not know the subject might wonder. For instance, I do not know if IP Bonding can be done between hosts? In short, despite the high quality of some of the writing, an executive summary must precede the article that tells people with varying degrees of understanding whether this is the article they need to read. RJMS (talk) 22:58, 12 November 2012 (UTC)
- The first paragraph is a little dense but not buzzword bloated and seems to describes what's happening and the motivation for it. I've seen much worse. Constructive suggestions for improvement are welcomed. -—Kvng 21:33, 14 November 2012 (UTC)
Advantages over static configuration - confusing?
[edit]The short section headed "Advantages over static configuration" is most confusing, since the word 'static' is used to differentiate types of aggregation (alternative types on HP switches being 'dynamic' and 'manual'). It seems to me that this isn't the meaning intended here? — Preceding unsigned comment added by WestNab (talk • contribs) 17:11, 3 January 2013 (UTC)
- My reading of this is that the comparison is being made between using LACP and setting up the active ports manually (statically). When using LACP, the two switches talk to each other and negotiate which ports are active in the link aggregation group. This means one of the group of cables could be unplugged, and there would be no disruption of service, as the LACP would tell both switches to disable the port in the group. Does that answer your confusion? —fudoreaper (talk) 13:38, 4 January 2013 (UTC)
Link Aggregation References
[edit]Coped from User_talk:Kvng#Link_Aggegation
Hi, I think you added some comments to sources used in Link aggregation and by that setting them as "missing ureliable resources". I might agree with the statement "Specific statistics must come from a specific source" and thus have no problems with that.
And the statement if most switches use the L2 or L3 hash is open for discussion; with the amount of multi-layer switches I woulnd't be able to say if they use the L2 hash or L3 hash as implementations tend to use as "hash": based on source/destination MAC or IP address" - which can be both L2 or L3 (including link aggregation implementations on teaming and virtual switches in virtualized environments (ESX, Hyper-V, Nexus 1000v etc))
The only 'comment' on a reference I don't understand is:
<ref>http://grouper.ieee.org/groups/802/3/hssg/public/apr07/frazier_01_0407.pdf{{rs|date=January 2013|reason=[[WP:PRIMARY]],[[WP:SPS]]}}</ref> What is wrong with this resource?
Thanks, Tonkie (talk) 00:45, 9 January 2013 (UTC)
- It is a WP:PRIMARY source because it is a presentation by one of the members of the IEEE 802.3 working group that designed link aggregation. Primary sources are OK in some contexts and this is probably one of them. But it is also self published in that the way these presentations get onto the internet is that the authors upload them to the IEEE website. -—Kvng 03:06, 9 January 2013 (UTC)
Sun cluster
[edit]Should the corresponding feature of Solaris/Sun cluster be referred to? — Preceding unsigned comment added by Towopedia (talk • contribs) 09:04, 17 April 2013 (UTC)
Mac OS X Link Aggregation
[edit]I was surprised that there was no mention of link aggregation on OS X. As a POSIX compliant system, you can aggregate in any POSIX compliant way, but Apple also provides a neat way to aggregate. While I have not tried the following method (copied from this page.) myself, it makes the process sound very easy:
- Go to System Preferences -> Network -> then select the small cog in the bottom left side (next to the + and -) and choose Manage Virtual Interfaces -> select the + in the bottom left and choose New link aggregate. Then you select the two wired interfaces and call it whatever you like. After that it will appear in the network list as one network interface.
Should I blast ahead and add something like this to the existing web page? StandardPerson (talk) —Preceding undated comment added 01:24, 27 November 2013 (UTC)
Do these belong in "See Also?"
[edit]Social network aggregation and Media aggregation platform are in "See Also." These don't seem to have anything to do with computer networking. Should they be removed? Daivox (talk) 10:50, 4 August 2015 (UTC)
- @Daivox:
Thank you for your suggestion. When you believe an article needs improvement, please feel free to make those changes. Wikipedia is a wiki, so anyone can edit almost any article by simply following the edit this page link at the top.
The Wikipedia community encourages you to be bold in updating pages. Don't worry too much about making honest mistakes—they're likely to be found and corrected quickly. If you're not sure how editing works, check out how to edit a page, or use the sandbox to try out your editing skills. New contributors are always welcome. You don't even need to log in (although there are many reasons why you might want to). -- intgr [talk] 12:00, 26 August 2015 (UTC)
External links modified
[edit]Hello fellow Wikipedians,
I have just modified one external link on Link aggregation. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:
- Added archive https://web.archive.org/web/20121019131903/http://www.linuxfoundation.org/collaborate/workgroups/networking/networkoverview to https://www.linuxfoundation.org/collaborate/workgroups/networking/networkoverview
When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.
This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}}
(last update: 5 June 2024).
- If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
- If you found an error with any archives or the URLs themselves, you can fix them with this tool.
Cheers.—InternetArchiveBot (Report bug) 11:47, 16 May 2017 (UTC)
Confusing addition in lead
[edit]@Pillzyx: For the record, I agree with Zac67's reversion of your recent changes. I read the added paragraph multiple times and it's so incomprehensible, I still don't understand what it's trying to say. Perhaps it's missing some context. -- intgr [talk] 12:57, 30 January 2018 (UTC)
- I've noticed these spurious additions in various articles. After the first unsourced reverts, Pillzyx started to use various journal sources which, as far as I could verify, are almost entirely unrelated and apparently serve as alibi. His/her edits are designed to make some incomprehensible claims that nobody is supposed to understand. This is subversive, disruptive editing that might be aiming at the heart of WP. --Zac67 (talk) 15:33, 30 January 2018 (UTC)
Channel Bonding
[edit]Why is channel bonding linked back to same article? Circular logic? - --KitchM (talk) 18:01, 19 April 2019 (UTC)
- Removed. ~Kvng (talk) 21:44, 5 June 2019 (UTC)
Is "Proprietary link aggregation" really a good heading?
[edit]Hi! Sure, some vendors probably have extensions to the standard link aggregation, but is it really fair to say that Cisco's EtherChannel, Juniper's "Aggregate Ethernet", Avaya/Extreme's MLT and some others are "Proprietary link aggregation"? They work together with each other and as far as I know, Juniper has no special add-ons to the standard. Isn't it more of a terminology thing? At least I think it should be pointed out that most of these work together but some may have additional features beyond the standard and that they fall back to the standard if the partner doesn't understand the extra features. Perhaps changing the heading to "Proprietary additions to link aggregation" would be a better heading? Fb35523 (talk) 10:26, 7 December 2020 (UTC)
- Your examples are no extensions to IEEE LACP but proprietary methods/protocols, so yes, the heading is good. When links are simply aggregated, without any protocol, those may very well interact with each other nicely, some even with a non-aggregating partner, but their inner workings are proprietary = not defined by an open standard nonetheless. --Zac67 (talk) 11:46, 7 December 2020 (UTC)
Start a discussion about improving the Link aggregation page
Talk pages are where people discuss how to make content on Wikipedia the best that it can be. You can use this page to start a discussion with others about how to improve the "Link aggregation" page.