Jump to content

Resonance Raman spectroscopy

From Wikipedia, the free encyclopedia
Energy level diagram showing scattering and fluorescence
Energy level diagram showing relationship between Rayleigh, Raman, and resonance Raman scattering and fluorescence.

Resonance Raman spectroscopy (RR spectroscopy or RRS) is a variant of Raman spectroscopy in which the incident photon energy is close in energy to an electronic transition of a compound or material under examination.[1] This similarity in energy (resonance) leads to greatly increased intensity of the Raman scattering of certain vibrational modes, compared to ordinary Raman spectroscopy.

Resonance Raman spectroscopy has much greater sensitivity than non-resonance Raman spectroscopy, allowing for the analysis of compounds with inherently weak Raman scattering intensities, or at very low concentrations.[2][3] It also selectively enhances only certain molecular vibrations (those of the chemical group undergoing the electronic transition), which simplifies spectra.[3] For large molecules such as proteins, this selectivity helps to identify vibrational modes of specific parts of the molecule or protein, such as the heme unit within myoglobin.[4] Resonance Raman spectroscopy has been used in the characterization of inorganic compounds and complexes,[5] proteins,[6][7] nucleic acids,[8] pigments,[8] and in archaeology and art history.[8]

Theory

[edit]

In Raman scattering, photons collide with a sample and are scattered with a difference in energy: The scattered photons may be higher or lower in energy (have a shorter or longer wavelength) than the incident photons. This difference in energy is caused by excitation of the sample to a higher or lower vibrational energy level: if the sample was initially in an excited vibrational state, the scattered photon may be higher in energy than the incident photon (anti-Stokes Raman scattering). Otherwise, the scattered photon has a lower module of energy than the incoming photon (Stokes Raman scattering). Among the two phenomena, Stokes shift and anti-Stokes shift, the former is the most likely to occur. As a consequence, the relative intensity of Raman spectra acquired in Stokes mode is more intense than the other. For most materials, Raman scattering is extremely weak compared to Rayleigh scattering, in which light is scattered without loss of energy.[9] Raman-scattered light, which contains information about vibrational transitions, is therefore difficult to observe for many substances.

Resonance Raman spectroscopy takes advantage of an increase in the intensity of Raman scattering when the incident photons match the energy of an electronic transition. If the energy of the photon striking the sample is equal or close to that of an electronic transition in the sample, certain Raman-active vibrational modes—those producing nuclear displacement in the same direction as the electronic transition[10]—will exhibit greatly enhanced scattering, up to 106-fold compared to nonresonance Raman.[3] For totally symmetric modes, this increased scattering intensity results from so-called A-term or Franck-Condon scattering, due to the nonzero Franck-Condon overlaps between ground and excited states. Nontotally symmetric modes may also be enhanced by B-term or Herzberg-Teller scattering, if the symmetry of the mode is contained in the direct product of the two electronic state symmetries.[11] Resonance enhancement is most apparent in the case of π-π* transitions and least for metal centered (d–d) transitions.[5] Like ordinary Raman spectroscopy, RRS observes vibrational transitions producing a nonzero change in the polarizability of the molecule or material being studied.

Resonance Raman scattering differs from fluorescence in that it occurs without vibrational relaxation during the lifetime of the excited electronic state. It thus exhibits much narrower line widths than fluorescence.[11] However, fluorescence and resonance Raman scattering co-occur in many materials, and interference from fluorescence may complicate the collection of resonance Raman spectra.[3]

Variants

[edit]

Typically, resonance Raman spectroscopy is performed in the same manner as ordinary Raman spectroscopy, using a single laser light source to excite the sample. The difference is the choice of the laser wavelength, which must be selected to match the energy of an electronic transition in the sample. A tunable laser is thus often used for resonance Raman spectroscopy, since a single laser can be used to generate many possible excitation wavelengths to match different samples.[8] By using multiple lasers, pulsed lasers, and/or certain sample preparation techniques, a range of more sophisticated variants of RRS can be performed, including:

  • Time-resolved resonance Raman spectroscopy: By using pulsed lasers with a controllable delay between pulses, resonance Raman spectroscopy can be used to monitor changes in the sample over time, following a laser-induced photochemical change or temperature increase.[12] This method has been used to examine the dynamics of excited electronic states,[13] binding of oxygen or other gases to heme-containing proteins,[14] and protein dynamics.[12][15]
  • Resonance hyper-Raman spectroscopy: Excitation of the sample occurs by two-photon absorption, rather than by absorption of a single photon. This arrangement allows for excitation of modes that are forbidden in ordinary resonance Raman spectroscopy, with intensity enhancement due to resonance, and also simplifies collection of scattered light. It is especially useful for molecules that are both polar and polarizable.[16]
  • Surface-enhanced resonance Raman spectroscopy: A hybrid of RRS and surface-enhanced Raman scattering. The sample is applied to conducting nanoparticles and a laser matching the surface plasmon resonance of the nanoparticles is used for excitation. If the wavelength of the surface plasmon matches that of an electronic transition in the sample, the Raman scattering will be greatly enhanced compared to ordinary RRS.[17]
  • Resonance Raman microscopy: A microscope is used to focus the excitation laser onto a particular point in the sample, and spectra are collected for many such points. The Raman intensity at different points can then be assembled into a microscopic image of the sample. By appropriate choice of excitation wavelength, a microscopic map of the distribution only of a component of interest can be made.[18]

Applications

[edit]
Example of resonance and nonresonance Raman spectra
Resonance (top) and nonresonance (bottom) Raman spectra of MoS2 on silicon. Note that excitation at 633 nm, near an electronic transition, causes appearance of bands that are too faint to be visible with excitation at 532 nm. Figure courtesy of David Tuschel.[1]

Because of its selectivity and sensitivity, resonance Raman spectroscopy is typically used to study molecular vibrations in compounds that would have very weak and/or complex Raman spectra in the absence of resonance enhancement. Like ordinary Raman spectroscopy, resonance Raman is compatible with samples in water, which has a very weak scattering intensity and little contribution to spectra. However, the need for an excitation laser with a wavelength matching that of an electronic transition in the analyte of interest somewhat limits the applicability of the method.[8]

Pigments and Dyes

[edit]

Dyes and pigments, all of which exhibit electronic transitions in the visible part of the electromagnetic spectrum, were among the first substances to be studied by resonance Raman spectroscopy. Resonance Raman spectra of beta-carotene and lycopene in intact plant samples were reported in 1970.[8] Since then, the method has been used to noninvasively measure levels of these nutrients in human skin.[19] The resonance Raman spectra of other polyene pigments, such as spheroidene and retinal, have been used to identify differences in chromophore conformation in photoactive proteins.[20][21] Resonance Raman spectroscopy has been used in archaeology to identify dyes and pigments in cultural artifacts, and the ability of RRS to distinguish different modern inks and dyes has found application in forensic science.[8]

Proteins

[edit]

Proteins have been widely examined by resonance Raman spectroscopy. Protein-bound cofactors that absorb in the visible wavelength range, such as heme, flavins, or transition metal complexes, can be examined by RRS with minimal spectral overlap from the rest of the molecule.[7][22] This method has been used to examine gas binding in hemeproteins[23] and the catalytic cycle of various enzymes.[24] Using ultraviolet laser excitation, it is possible to selectively excite the sidechains of aromatic amino acids (phenylalanine, tyrosine, and tryptophan) to deduce the local environment and hydrogen-bonding interactions by these residues.[25] With shorter-wavelength ("deep") ultraviolet excitation, it is also possible to excite the peptide bonds of a protein in order to examine secondary structure. Protein folding and denaturation have been examined using deep-UV resonance Raman spectroscopy of the polypeptide backbone, with excitation wavelengths shorter than 200 nm.[25]

Nucleic acids and viruses

[edit]

Resonance Raman spectroscopy with ultraviolet excitation can be used to examine the chemistry, structure, and intermolecular interactions of nucleic acids, specifically the bases. Interactions between nucleic acids and DNA-binding compounds such as drugs can be examined by selectively exciting either the nucleobases or the drug itself.[8] The resonance Raman spectra of DNA can be used to identify bacterial DNA in living cells, and to quantitate DNA under different culture conditions, and even to distinguish different bacterial species.[8] Viruses have also been studied using UV resonance Raman spectroscopy; the method has the capability to separately interrogate the structure of the nucleic acid or capsid protein components of the virus, through the choice of the appropriate excitation wavelength.[26]

Nanomaterials

[edit]

Resonance Raman spectroscopy has also been used to characterize the structure and photophysical properties of nanoparticles. Using lasers tuned to the visible and near-infrared electronic transitions of carbon nanotubes, it is possible to enhance structure-sensitive vibrational bands of the nanotubes.[8] Nanowires of inorganic semiconductor materials including gallium phosphide and carbon-encapsulated mercury telluride have also been shown to exhibit resonance Raman spectra with visible excitation light.[27][28]

See also

[edit]

References

[edit]
  1. ^ Strommen, Dennis P.; Nakamoto, Kazuo (1977). "Resonance raman spectroscopy". Journal of Chemical Education. 54 (8): 474. Bibcode:1977JChEd..54..474S. doi:10.1021/ed054p474. ISSN 0021-9584.
  2. ^ Drago, R.S. (1977). Physical Methods in Chemistry. Saunders. p. 152.
  3. ^ a b c d Morris, Michael D.; Wallan, David J. (1979). "Resonance raman spectroscopy: Current applications and prospects". Analytical Chemistry. 51 (2): 182A–192A. doi:10.1021/ac50038a001. ISSN 0003-2700.
  4. ^ Hu, Songzhou; Smith, Kevin M.; Spiro, Thomas G. (January 1996). "Assignment of Protoheme Resonance Raman Spectrum by Heme Labeling in Myoglobin". Journal of the American Chemical Society. 118 (50): 12638–46. doi:10.1021/ja962239e.
  5. ^ a b Clark, Robin J.H.; Dines, Trevor J. (February 1986). "Resonance Raman spectroscopy, and its application to inorganic chemistry". Angewandte Chemie International Edition. 25 (2): 131–158. doi:10.1002/anie.198601311. ISSN 0570-0833.
  6. ^ Austin, J.C.; Rodgers, K.R.; Spiro, T.G. (1993). Protein Structure from ultraviolet resonance Raman spectroscopy. Methods in Enzymology. Vol. 226. pp. 374–396. doi:10.1016/0076-6879(93)26017-4. PMID 8277873.
  7. ^ a b Spiro, T.G.; Czernuszewicz, R.S. (1995). Resonance Raman spectroscopy of metalloproteins. Methods in Enzymology. Vol. 246. pp. 416–460. doi:10.1016/0076-6879(95)46020-9. ISSN 0076-6879. PMID 7752933.
  8. ^ a b c d e f g h i j Efremov, Evtem V.; Ariese, Freek; Gooijer, Cees (2008). "Achievements in resonance Raman spectroscopy: Review of a technique with a distinct analytical chemistry potential". Analytica Chimica Acta. 606 (2): 119–134. doi:10.1016/j.aca.2007.11.006. PMID 18082644.
  9. ^ Orlando, Andrea; Franceschini, Filippo; Muscas, Cristian; Pidkova, Solomiya; Bartoli, Mattia; Rovere, Massimo; Tagliaferro, Alberto (2021). "A comprehensive review on Raman spectroscopy applications". Chemosensors. 9 (9): 262. doi:10.3390/chemosensors9090262.
  10. ^ Hirakawa, Akiko Y.; Tsuboi, Masamichi (1975). "Molecular geometry in an excited electronic state and a preresonance Raman effect". Science. 188 (4186): 359–361. doi:10.1126/science.188.4186.359. JSTOR 1739341. PMID 17807877. S2CID 7686714.
  11. ^ a b Spiro, T.G.; Stein, Paul (1977). "Resonance effects in vibrational scattering from complex molecules". Annual Review of Physical Chemistry. 28: 501–521. doi:10.1146/annurev.pc.28.100177.002441.
  12. ^ a b Buhrke, David; Hildebrandt, Peter (2020). "Probing structure and reaction dynamics of proteins using time-resolved Raman spectroscopy". Chemical Reviews. 120 (7): 3577–3630. doi:10.1021/acs.chemrev.9b00429. ISSN 0009-2665. PMID 31814387. S2CID 208954659.
  13. ^ Sahoo, Sangram Keshari; Umapathy, Siva; Parker, Anthony W. (2011). "Time-resolved resonance Raman spectroscopy: Exploring reactive intermediates". Applied Spectroscopy. 65 (10): 1087–1115. doi:10.1366/11-06406. ISSN 0003-7028. PMID 21986070. S2CID 20448809.
  14. ^ Spiro, Thomas G. (1985). "Resonance Raman spectroscopy as a probe of heme protein structure and dynamics". Advances in Protein Chemistry. 37: 111–159. doi:10.1016/S0065-3233(08)60064-9. ISBN 9780120342372. ISSN 0065-3233. PMID 2998161.
  15. ^ Mizutani, Yasuhisa (2017). "Time-resolved resonance Raman spectroscopy and application to studies on ultrafast protein dynamics". Bulletin of the Chemical Society of Japan. 90 (12): 1344–1371. doi:10.1246/bcsj.20170218. ISSN 0009-2673.
  16. ^ Kelley, Anne Myers (2010). "Hyper-Raman Scattering by Molecular Vibrations". Annual Review of Physical Chemistry. 61 (1): 41–61. doi:10.1146/annurev.physchem.012809.103347. ISSN 0066-426X. PMID 20055673.
  17. ^ Smith, W.E. (2008). "Practical understanding and use of surface-enhanced Raman scattering/surface-enhanced resonance Raman scattering in chemical and biological analysis". Chemical Society Reviews. 37 (5): 955–964. doi:10.1039/b708841h. ISSN 1460-4744. PMID 18443681.
  18. ^ Vogt, Frederick G.; Strohmeier, Mark (2013). "Confocal UV and resonance Raman microscopic imaging of pharmaceutical products". Molecular Pharmaceutics. 10 (11): 4216–4228. doi:10.1021/mp400314s. ISSN 1543-8384. PMID 24050305.
  19. ^ Scarmo, Stephanie; Cartmel, Brenda; Lin, Haiqun; Leffell, David J.; Ermakov, Igor V.; Gellermann, Werner; Bernstein, Paul S.; Mayne, Susan T. (2013). "Single v. multiple measures of skin carotenoids by resonance Raman spectroscopy as a biomarker of usual carotenoid status". British Journal of Nutrition. 110 (5): 911–917. doi:10.1017/S000711451200582X. PMC 3696054. PMID 23351238.
  20. ^ Senak, L.; Ju, Z.M.; Noy, N.; Callender, R.; Manor, D. (1997). "The interactions between cellular retinol-binding protein (CRBP-I) and retinal: A vibrational spectroscopic study". Biospectroscopy. 3 (2): 131–142. doi:10.1002/(SICI)1520-6343(1997)3:2<131::AID-BSPY6>3.0.CO;2-A. ISSN 1075-4261.
  21. ^ Mathies, Guinevere; van Hemert, Marc C.; Gast, Peter; Gupta, Karthick B. Sai Sankar; Frank, Harry A.; Lugtenburg, Johan; Groenen, Edgar J.J. (2011). "Configuration of spheroidene in the photosynthetic reaction center of Rhodobacter spheroides: A comparison of wild-type and reconstituted R26". Journal of Physical Chemistry A. 115 (34): 9552–9556. doi:10.1021/jp112413d. hdl:1887/3570972. ISSN 1089-5639. PMID 21604722.
  22. ^ Stanley, R.J. (2001). "Advances in flavin and flavoprotein optical spectroscopy". Antioxidants & Redox Signaling. 3 (5): 847–866. doi:10.1089/15230860152665028. ISSN 1523-0864. PMID 11761332.
  23. ^ Hirota, S.; Ogura, T.; Appelman, E.H.; Shinzawaitoh, K.; Yoshikawa, S.; Kitagawa, T. (1994). "Observation of a new oxygen-isotope-sensitive Raman band for oxyhemoproteins and its implication in heme pocket structures". Journal of the American Chemical Society. 116 (23): 10564–10570. doi:10.1021/ja00102a025. ISSN 0002-7863.
  24. ^ Mukherjee, Manjistha; Dey, Abhishek (2021). "Rejigging Electron and Proton Transfer to Transition between Dioxygenase, Monooxygenase, Peroxygenase, and Oxygen Reduction Activity: Insights from Bioinspired Constructs of Heme Enzymes". JACS Au. 1 (9): 1296–1311. doi:10.1021/jacsau.1c00100. ISSN 2691-3704. PMC 8479764. PMID 34604840.
  25. ^ a b Oladepo, Sulayman A.; Xiong, Kan; Hong, Zhenmin; Asher, Sanford A.; Handen, Joseph; Lednev, Igor K. (2012). "UV resonance Raman investigations of peptide and protein structure and dynamics". Chemical Reviews. 112 (5): 2604–2628. doi:10.1021/cr200198a. PMC 3349015. PMID 22335827.
  26. ^ Thomas, George J. (1999). "Raman spectroscopy of protein and nucleic acid assemblies". Annual Review of Biophysics and Biomolecular Structure. 28: 1–27. doi:10.1146/annurev.biophys.28.1.1. ISSN 1056-8700. PMID 10410793.
  27. ^ Spencer, Joseph; Nesbitt, John; Trewhitt, Harrison; Kashtiban, Reza; Bell, Gavin; Ivanov, Victor; Faulques, Eric; Smith, David (2014). "Raman Spectroscopy of Optical Transitions and Vibrational Energies of ~1 nm HgTe Extreme Nanowires within Single Walled Carbon Nanotubes" (PDF). ACS Nano. 8 (9): 9044–52. doi:10.1021/nn5023632. PMID 25163005.
  28. ^ Panda, Jaya Kumar; Roy, Anushree; Gemmi, Mauro; Husnau, Elena; Li, Ang; Ercolani, Daniele; Sorba, Lucia (2013). "Electronic band structure of wurtzite GaP nanowires via temperature dependent resonance Raman spectroscopy". Applied Physics Letters. 103 (2): 023108. arXiv:1303.7058. doi:10.1063/1.4813625. ISSN 0003-6951. S2CID 93629086.

Further reading

[edit]
[edit]