Jump to content

Type 1 Ho-Ha

From Wikipedia, the free encyclopedia
Type 1 Ho-Ha
Type 1 Ho-Ha
Typehalf-track armoured personnel carrier
Place of originEmpire of Japan
Service history
WarsWorld War II
Production history
Designed1941[1][2]
ManufacturerHino Motors
Produced1944–?
No. built150-300 (estimated)[3]
Specifications (Type 1 Ho-Ha[4])
Mass6.5 tonnes (7.2 tons)[4]
Length6.1 m (20 ft 0 in)[5]
Width2.1 m (6 ft 11 in)[5]
Height2.51 m (8 ft 3 in)[4]
Crew2 + 13 passengers[6]

Armormax 8 mm[5]
Main
armament
3 × 7.7 mm Type 97 light machine guns[4]
EngineDiesel engine
134 PS (99 kW) at 2,000 rpm[5]
Operational
range
300 km (190 mi)[5]
Maximum speed 50 km/h (31 mph)[5]

The Type 1 Ho-Ha (一式半装軌装甲兵車 ホハ, Ichi-shiki han-sōki sōkō-heisha hoha) was a half-track armoured personnel carrier (APC) used in limited numbers by the Imperial Japanese Army (IJA) during World War II.

Front and side view of Type 1 Ho-Ha

Development and history

[edit]

The Type 1 Ho-Ha was developed in 1941 as a result of a request from the army for a vehicle that could be used to transport a squad of infantry to the battlefield protected from enemy small arms fire. Despite experiences of the Second Sino-Japanese War, armored personnel carriers were viewed as too slow compared to wheeled trucks and there was not much effort for their development in the army.[1][2]

Mass production began in 1944 with the Type 1 Ho-Ha being an addition to the Type 1 Ho-Ki, an unrelated, yet similarly named armored tracked personnel carrier.[1][4] The half-tracked Type 1 Ho-Ha was built by Hino Motors in unknown quantities.[2][4]

Design

[edit]

The Type 1 Ho-Ha was based on the German Sd.Kfz. 251/1 (known popularly as Hanomag), the main armoured personnel carrier of the German Army, but did not use the overlapped and interleaved road wheels of the German design's suspension.[1][2] Further, it had a "vertical rear plate with a door", akin to the American M3 Half-track; however, the door itself was a copy of the German "two-leaf" design.[2]

The Type 1 Ho-Ha had a pair of road wheels in front, supported by a pair of short caterpillar tracks to the rear.[1] It was equipped with a tow coupling in the front and a towing hitch at the rear to haul artillery or a supply trailer. The maximum armor thickness was 8 mm with sloping armor plates. As with the Type 1 Ho-Ki, the hull was welded construction and it was "open-topped".[7]

The Type 1 Ho-Ha carried three Type 97 light machine guns as standard armament, one on each side, just to the rear of the driver's compartment and a third mounted to the rear as an anti-aircraft weapon.[1] All of these weapons had constricted firing arcs, which made firing directly forward or directly rearward impossible.[1]

Combat record and post-war

[edit]

The Type 1 Ho-Ha was initially deployed to China for operations in the ongoing Second Sino-Japanese War, but never in any great numbers. It was later deployed with the Japanese reinforcements in the Battle of the Philippines in 1944. Post-war, some Type 1 Ho-Ha half-tracks were modified by cutting off the rear armored section and replacing it with a flat bed. They were then used for reconstruction work in areas of Japan.[8]

Footnotes

[edit]
  1. ^ a b c d e f g "Support Vehicles in Japanese Service", Japanese Armored Vehicles of the Second World War, 2008-08-28, archived from the original on 2008-08-28
  2. ^ a b c d e Tomczyk 2003, p. 57.
  3. ^ WW 2 Japanese Other Vehicles Type 1 Ho-Ha
  4. ^ a b c d e f Taki's Imperial Japanese Army: Type 1 "Ho-Ha"
  5. ^ a b c d e f Tomczyk 2003, p. 64.
  6. ^ Tomczyk 2003, p. 63.
  7. ^ Tomczyk 2003, pp. 58, 65.
  8. ^ Zaloga 2007, p. 45.

References

[edit]
  • Foss, Christopher F (2002). The Encyclopedia of Tanks and Armored Fighting Vehicles: The Comprehensive Guide to over 900 Armored Fighting Vehicles from 1915 to the Present Day. Thunder Bay Press. ISBN 1-57145-806-9.
  • Tomczyk, Andrzej (2003). Japanese Armor Vol. 3. AJ Press. ISBN 978-8372371287.
  • Zaloga, Steven J. (2007). Japanese Tanks 1939–45. Osprey. ISBN 978-1-8460-3091-8.
[edit]