Null fill
Appearance
![]() | This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages)
|
Null fill in radio engineering is used in radio antenna systems which are located on mountains or tall towers, to prevent too much of the signal from overshooting the nearest part of intended coverage area. Phasing is used between antenna elements to take power away from the main lobe and electrically direct more of it at a more downward angle in the vertical plane. This requires a phased array. Changing the relative power supplied to each element also changes the radiation pattern in this manner, and often both methods are used in combination.
See also
[edit]References
[edit]