Jump to content

Total variation

From Wikipedia, the free encyclopedia

In mathematics, the total variation identifies several slightly different concepts, related to the (local or global) structure of the codomain of a function or a measure. For a real-valued continuous function f, defined on an interval [a, b] ⊂ R, its total variation on the interval of definition is a measure of the one-dimensional arclength of the curve with parametric equation xf(x), for x ∈ [a, b]. Functions whose total variation is finite are called functions of bounded variation.

Historical note

[edit]

The concept of total variation for functions of one real variable was first introduced by Camille Jordan in the paper (Jordan 1881).[1] He used the new concept in order to prove a convergence theorem for Fourier series of discontinuous periodic functions whose variation is bounded. The extension of the concept to functions of more than one variable however is not simple for various reasons.

Definitions

[edit]

Total variation for functions of one real variable

[edit]

Definition 1.1. The total variation of a real-valued (or more generally complex-valued) function , defined on an interval is the quantity

where the supremum runs over the set of all partitions of the given interval. Which means that .

Total variation for functions of n > 1 real variables

[edit]

Definition 1.2.[2] Let Ω be an open subset of Rn. Given a function f belonging to L1(Ω), the total variation of f in Ω is defined as

where

This definition does not require that the domain of the given function be a bounded set.

Total variation in measure theory

[edit]

Classical total variation definition

[edit]

Following Saks (1937, p. 10), consider a signed measure on a measurable space : then it is possible to define two set functions and , respectively called upper variation and lower variation, as follows

clearly

Definition 1.3. The variation (also called absolute variation) of the signed measure is the set function

and its total variation is defined as the value of this measure on the whole space of definition, i.e.

Modern definition of total variation norm

[edit]

Saks (1937, p. 11) uses upper and lower variations to prove the Hahn–Jordan decomposition: according to his version of this theorem, the upper and lower variation are respectively a non-negative and a non-positive measure. Using a more modern notation, define

Then and are two non-negative measures such that

The last measure is sometimes called, by abuse of notation, total variation measure.

Total variation norm of complex measures

[edit]

If the measure is complex-valued i.e. is a complex measure, its upper and lower variation cannot be defined and the Hahn–Jordan decomposition theorem can only be applied to its real and imaginary parts. However, it is possible to follow Rudin (1966, pp. 137–139) and define the total variation of the complex-valued measure as follows

Definition 1.4. The variation of the complex-valued measure is the set function

where the supremum is taken over all partitions of a measurable set into a countable number of disjoint measurable subsets.

This definition coincides with the above definition for the case of real-valued signed measures.

Total variation norm of vector-valued measures

[edit]

The variation so defined is a positive measure (see Rudin (1966, p. 139)) and coincides with the one defined by 1.3 when is a signed measure: its total variation is defined as above. This definition works also if is a vector measure: the variation is then defined by the following formula

where the supremum is as above. This definition is slightly more general than the one given by Rudin (1966, p. 138) since it requires only to consider finite partitions of the space : this implies that it can be used also to define the total variation on finite-additive measures.

Total variation of probability measures

[edit]

The total variation of any probability measure is exactly one, therefore it is not interesting as a means of investigating the properties of such measures. However, when μ and ν are probability measures, the total variation distance of probability measures can be defined as where the norm is the total variation norm of signed measures. Using the property that , we eventually arrive at the equivalent definition

and its values are non-trivial. The factor above is usually dropped (as is the convention in the article total variation distance of probability measures). Informally, this is the largest possible difference between the probabilities that the two probability distributions can assign to the same event. For a categorical distribution it is possible to write the total variation distance as follows

It may also be normalized to values in by halving the previous definition as follows

[3]

Basic properties

[edit]

Total variation of differentiable functions

[edit]

The total variation of a function can be expressed as an integral involving the given function instead of as the supremum of the functionals of definitions 1.1 and 1.2.

The form of the total variation of a differentiable function of one variable

[edit]

Theorem 1. The total variation of a differentiable function , defined on an interval , has the following expression if is Riemann integrable

If is differentiable and monotonic, then the above simplifies to

For any differentiable function , we can decompose the domain interval , into subintervals (with ) in which is locally monotonic, then the total variation of over can be written as the sum of local variations on those subintervals:

The form of the total variation of a differentiable function of several variables

[edit]

Theorem 2. Given a function defined on a bounded open set , with of class , the total variation of has the following expression

.
Proof
[edit]

The first step in the proof is to first prove an equality which follows from the Gauss–Ostrogradsky theorem.

Lemma
[edit]

Under the conditions of the theorem, the following equality holds:

Proof of the lemma
[edit]

From the Gauss–Ostrogradsky theorem:

by substituting , we have:

where is zero on the border of by definition:

Proof of the equality
[edit]

Under the conditions of the theorem, from the lemma we have:

in the last part could be omitted, because by definition its essential supremum is at most one.

On the other hand, we consider and which is the up to approximation of in with the same integral. We can do this since is dense in . Now again substituting into the lemma:

This means we have a convergent sequence of that tends to as well as we know that . Q.E.D.

It can be seen from the proof that the supremum is attained when

The function is said to be of bounded variation precisely if its total variation is finite.

Total variation of a measure

[edit]

The total variation is a norm defined on the space of measures of bounded variation. The space of measures on a σ-algebra of sets is a Banach space, called the ca space, relative to this norm. It is contained in the larger Banach space, called the ba space, consisting of finitely additive (as opposed to countably additive) measures, also with the same norm. The distance function associated to the norm gives rise to the total variation distance between two measures μ and ν.

For finite measures on R, the link between the total variation of a measure μ and the total variation of a function, as described above, goes as follows. Given μ, define a function by

Then, the total variation of the signed measure μ is equal to the total variation, in the above sense, of the function . In general, the total variation of a signed measure can be defined using Jordan's decomposition theorem by

for any signed measure μ on a measurable space .

Applications

[edit]

Total variation can be seen as a non-negative real-valued functional defined on the space of real-valued functions (for the case of functions of one variable) or on the space of integrable functions (for the case of functions of several variables). As a functional, total variation finds applications in several branches of mathematics and engineering, like optimal control, numerical analysis, and calculus of variations, where the solution to a certain problem has to minimize its value. As an example, use of the total variation functional is common in the following two kind of problems

See also

[edit]

Notes

[edit]
  1. ^ According to Golubov & Vitushkin (2001).
  2. ^ Ambrosio, Luigi; Fusco, Nicola; Pallara, Diego (2000). Functions of Bounded Variation and Free Discontinuity Problems. Oxford University Press. p. 119. ISBN 9780198502456.
  3. ^ Gibbs, Alison; Francis Edward Su (2002). "On Choosing and Bounding Probability Metrics" (PDF). p. 7. Retrieved 8 April 2017.

Historical references

[edit]

References

[edit]
[edit]

One variable

One and more variables

Measure theory

Applications

[edit]
  • Blomgren, Peter; Chan, Tony F. (1998), "Color TV: total variation methods for restoration of vector-valued images", IEEE Transactions on Image Processing, 7 (3), Image Processing, IEEE Transactions on, vol. 7, no. 3: 304-309: 304, Bibcode:1998ITIP....7..304B, doi:10.1109/83.661180, PMID 18276250.